Promotion: 126 watt combo beam LED bar + connection kit + mount support

Set consisting of a 126 watt combo beam bar, a connection set and a bumper support.

The bar is equipped with CREE LEDs, which give 20% to 30% more light than Epistar LEDs, and is multi-voltage and can therefore be used from 9 to 32 volts.

The 126 watt light bar is 51 cm wide. It is equipped with spotlights in the middle with a beam angle of 25 degrees and wide beam lights on the outside with a beam angle of 45 degrees. This creates a good overall light image that shines both far and wide (combi beam).

The mounting points of the beam are at the bottom and can be moved along the entire length. This makes it easy to fit in the old mounting holes of conventional halogen or Xenon spotlights if needed. To mount the lamp on the bumper support 2 spacers are included.

The 12 volt / 30 amp connection set is fully pre-assembled and allows you to easily connect the lamp to the battery.

The universal bumper plate is made of 2.36 mm metal with black powder coating.
Various mounting holes allow a LED bar or separate radiators to be mounted on it.

Specifications led bar:

• Power: 126 watts
• Lumen: 11500
• Light image: Combi beam (flood + spot)
• Voltage: 9-32 volts
• Consumption: 12v: 10.5 amp / 24v: 5.25 amp.
• Type of LED: CREE
• Light color: 6000-6500K
• Number of LEDs: 42
• Lens: PMMA
• Casing: Aluminum
• Size: 505 x 107 x 73 mm
• Weight: approx. 1300 grams
• Mounting: aluminum mounting brackets with M8 bolt
• Lifespan: 30,000 hours
• Water resistant: IP67
• Certification: ECE R10

Specifications connection set:

• on / off switch with LED indicator
• relay 40A
• fuse 30A
• battery connection points
• connectors for LED lighting
• cable relay -> lamp 290cm
• cable relay -> switch 290 cm

Bumper support specifications:

• Size: 585 / 370 x 125 / 110 x 90 / 55 mm (bracket / plate)
• Shackle diameter: 30 mm
• Lamp mounting holes 310 mm and 190 mm apart